| Model : |
OE-96R |
| Measuring range : |
Resistivity
0 ~ 20.00MΩ cm
0 ~ 2.00MΩ cm
0 ~ 0.200MΩ cm
0 ~ 100.00MΩ cm
*1 Temperature: 0-100°C (measurement only) |
| Reproducibility : |
±0.5% FS |
| Transmission output : |
DC 4-20 mA, isolated input/output type, max. load resistance: 500 Ω
|
| Transmission output range : |
Resistivity
0 ~ 20.00MΩ cm
0 ~ 2.00MΩ cm
0 ~ 0.200MΩ cm
0 ~ 100.00MΩ cm |
| Control output : |
1 c contact output, 2 CH independent capacity: AC 250 V, 3 A max. (resistance load) |
| Control operation : |
ON/OFF control: upper limit operation (H) or lower limit operation (L) (selectable with internal DIP switch) |
| Upper/lower limit setting range : |
Within measuring range of each range |
| Control width : |
0-20% (0±10%) of full scale for each range |
| Calibration function : |
Fine adjustment according to setting of cell constant |
| Additional functions : |
1) Various error messages
Sensor diagnostic error (temperature sensor short-circuit, temperature sensor disconnection)
Outside measuring range error (over or under full scale)
System error (defective A/D converter, memory error)
2) Transmission output during calibration: Continuous, holding of previous value (selectable with panel DIP switch)
3) Temperature calibration function: One-point calibration
4) Arbitrary setting of temperature conversion compensation coefficient: 0 ± 5%/°C
|
| Reference temperature : |
25°C (set arbitrarily: 5-95°C) |
| Temperature compensation coefficient : |
Theoretically ultra-pure water + NaCl or 0 ±5%/°C (set arbitrarily) |
| Temperature compensation range : |
0-100°C |
| Temperature compensation accuracy : |
±1%/FS |
| Temperature compensation element : |
Pt 1000 Ω (0°C) |
| Ambient temperature and humidity : |
-5 to 40°C, 85% RH or less |
| Power supply : |
AC90 ~ 260V,50/60Hz,10W |
| Structure : |
Panel-mounted: DIN 96 x 96
Indoor installation Case: SPCC Panel: ABS |
| External dimensions : |
96(W) x 96(H) x 145(D), case depth: 135 mm |
| Weight : |
Approx. 650 g |
